Products

Products of Megger

  • Megger SVERKER 750/780  | 1-Phase Relay Tester
    Megger SVERKER 750/780 | 1-Phase Relay Tester

    The SVERKER750 and SVERKER780 Relay Test Set are the engineer's toolbox. The control panel features a logical layout, SVERKER 650 users will find it comfortably familiar and will be able to start work right away. The SVERKER750 and SVERKER780 features many functions that make relay testing more efficient. For example, its powerful measurement section can display (in addition to time, voltage and current) Z, R, X, S, P, Q, phase angle and cos ?. The voltmeter can also be used as a 2nd ammeter (when testing differential relays for example). All values are presented on a single easy-to-read display. You can also test directional protective equipment efficiantly by means of the built-in variable voltage source. In SVERKER780 this has a continuous phase shift function and adjustable frequency as well. Automatic reclosing devices can also be tested – just as easily. Designed to comply with EU standards and other personal and operational safety standards, SVERKER750 and SVERKER780 are also equipped with a serial port for communication with personal computers and the PC software SVERKER Win.

    View More
  • Megger SVERKER 650  | 1-Phase Relay Tester
    Megger SVERKER 650 | 1-Phase Relay Tester

    The Sverker 650 testing unit, whose design incorporates benefits gleaned from many years of experience in field relay testing, enjoys a well-earned reputation for reliability and convenience. Compact and powerful, it provides all of the functions needed for secondary testing of almost all types of single-phase protection now available on the market.

    View More
  • Megger PAM410  | Phase Angle Meter
    Megger PAM410 | Phase Angle Meter

    The PAM410 is specifically designed for measurements on electrical power systems. It is capable of displaying the phase angle relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

    View More
  • Megger PAM420  | Phase Angle Meter
    Megger PAM420 | Phase Angle Meter

    The PAM420 is specifically designed for measurements on electrical power systems. It is capable of displaying phase angle, voltage, current, frequency and timing. The phase angle is calculated from the relationship between two power signals, which can be two currents, two voltages or any combination. Currents up to 25 A and voltages up to 500 V can be applied directly to the instrument. The current input range can be extended by using external current transformers.

    View More
  • Megger SMRT Series  | 3-Phase Relay Tester
    Megger SMRT Series | 3-Phase Relay Tester

    The SMRT Series test system may be customized by adding the number of Voltage-Current, “VIGEN”, modules needed for specific test applications. The SMRT Series has the “smart” combination of high compliance voltage and high current to test all electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled, voltage restraint and high impedance directional ground overcurrent. The SMRT Series provides a complete multi-phase test system for commissioning of protection systems. The SMRT Series test system has the ability to be manually controlled with Megger’s new Smart Touch View Interface™ (STVI). The STVI, with its large, full color, high resolution, TFT LCD touch screen allows the user to perform manual, steady-state and dynamic testing quickly and easily using the manual test screen, as well as using built-in preset test routines for most popular relays. The STVI eliminates the need for a computer when testing virtually all types of relays. Menu screens and touch screen function buttons are provided to quickly and easily select the desired test function. Tests results can be saved to the STVI for download to a memory stick to transfer or print test reports. For full automatic testing the SMRT Series may be controlled by Megger Advanced Visual Test Software (AVTS). AVTS is a Microsoft® Windows® XP®/Vista™/7 compatible software program designed to manage all aspects of protective relay testing using the new Megger SMRT.

    View More
  • Megger GOOSER  | IEC 61850 Test System
    Megger GOOSER | IEC 61850 Test System

    The GOOSE message interface provides two physically isolated Ethernet ports to safeguard your network from unwelcome erroneous messages from your PC, as the isolated ports do not allow communication from the direction of the PC to the Network. GOOSE message interface can convert IEC61850 GOOSE messages coming from the rear Ethernet port to physical binary output and it converts a binary input physical contact (voltage or contact) into GOOSE message publication. GOOSE message interface has 10 binary inputs and 10 binary outputs. In addition, GOOSE message interface can be used by control engineers who do not need relay test sets to check and simulate the interlocking system using send/receive GOOSE messages

    View More
  • STATES  FMS Test Paddle/Plug  |  Test Paddle/Plug
    STATES FMS Test Paddle/Plug | Test Paddle/Plug

    The NEW STATES® 10 and 14 pole potential test paddles are feature packed and have been designed to make a test technician's job easier.

    View More
  • Megger SMRT1  | 1-Phase Relay Tester
    Megger SMRT1 | 1-Phase Relay Tester

    As a stand-alone unit the SMRT1 has the “smart” combination of high compliance voltage and high current to test electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled, voltage restraint and directional overcurrent; test under/over voltage, single-phase impedance, single-phase power, directional, synchronizing, auto-synchronizing, negative sequence under/over voltage, current balance, frequency, volts/hertz, reclosing, thermal, and various other relays, see the Applications Guide for more. The SMRT1 test system has the ability to be manually controlled with Megger’s new Smart Touch View Interface™ (STVI). The STVI, with its large, full color, high resolution, TFT LCD touch screen allows the user to perform manual, steady-state and dynamic testing quickly and easily using the manual test screen, as well as using built-in preset test routines for most popular relays. The STVI eliminates the need for a computer when testing virtually all types of relays. Menu screens and touch screen function buttons are provided to quickly and easily select the desired test function. Tests results can be saved to the PowerDB™ ONBOARD for download to a memory stick to transfer or print test reports. For full automatic testing the SMRT1 may be controlled by Megger Advanced Visual Test Software (AVTS). AVTS is a Microsoft® Windows® XP®/Vista™/7 compatible software program designed to manage all aspects of protective relay testing using the new Megger SMRT.

    View More
  • STATES FMS Test Switches  |  Test Switches
    STATES FMS Test Switches | Test Switches

    The STATES Type FMS Semiflush-Mounted Test Switches provide a compact, versatile means to disconnect, test or measure devices and circuits in panelboards such as relays, metering, control circuits and other instrumentation applications. The FMS Switch works without instrument transformers being disconnected from secondary wiring

    View More
  • Megger Magnus  | Step-Up Transformer
    Megger Magnus | Step-Up Transformer

    When power systems are put into operation or when faults occur, it becomes necessary to check the instrument transformers to make sure that they are providing test instruments and protective relay equipment with the correct outputs. MAGNUS™ permits you to prepare excitation curves for instrument transformers quickly and easily. MAGNUS is also used to demagnetize current transformer cores and to conduct turn-ratio tests on voltage transformers. Even though it weighs only 16 kg (35 lbs), it provides 1 A at 2.2 kV. Two-hand control enhances personal safety. As standard, MAGNUS is delivered with a special high-voltage cable and a robust transport case.

    View More
  • Megger SMRT36D | Smart Grid Relay Test System
    Megger SMRT36D | Smart Grid Relay Test System

    The SMRT36D is a multipurpose, light-weight, field portable test set capable of testing a wide variety of electro-mechanical, solid-state and microprocessor-based protective relays, small molded case circuit breakers, motor overload relays and similar protective devices.

    View More
  • Megger INGVAR  | Primary Current Injection Test
    Megger INGVAR | Primary Current Injection Test

    This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents. The system consists of a control unit and a current unit. The two parts are portable, and INGVAR can be quickly assembled and connected. The control unit has many advanced features – a powerful measurement section for example, that can display turns ratio as well as time, voltage and current. A second measurement channel can be used to test an additional current or voltage. Current transformer turns ratio, impedance, power, power factor (cos ?) and phase angle are calculated and shown in the display. Current and voltage can be presented as percentages of nominal value. The fast-acting hold function freezes short-duration readings on the digital display when the voltage or contact signal arrives at the stop input, the object under test interrupts the current or injection is stopped.

    View More
  • Megger ODEN A  | Primary Current Injection Test
    Megger ODEN A | Primary Current Injection Test

    A powerful test system designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the transformation ratio of current transformers and for other applications that require high variable currents. Up to 8 kA can be generated. The ODEN™A system consists of a control unit together with one or two current units. All parts are portable, and ODEN A can be quickly assembled and connected. There are two versons of the current unit: S and X, S and X are identical except that X has an additional 30/60 V output.

    View More
  • Megger ODEN AT  | Primary Current Injection
    Megger ODEN AT | Primary Current Injection

    This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents.

    View More
  • Megger CSU600A / AT   | Current Supply Unit
    Megger CSU600A / AT | Current Supply Unit

    These high-current supply units have two main fields of application. The first is to conduct primary tests on protective relays. A primary test shows whether all parts of the protection system are functioning together properly within the specified time limits under operating conditions. The second field of application involves conducting current tests on low-voltage circuit breakers and overcurrent devices.

    View More
  • Megger DLRO10X   | Micro-OhmMeter
    Megger DLRO10X | Micro-OhmMeter

    The MEGGER DUCTER DLRO10 and DUCTER DLRO10X bring new standards to low resistance measurement. Both are fully automatic instruments, selecting the most suitable test current, up to 10 A dc to measure resistance from 0.1 µ? to 2000 ? on one of seven ranges. For users who desire more control over the measurement process, DLRO 10X uses a menu system controlled by a two-axis paddle to allow manual selection of the test current. DLRO10X also adds real-time download of results and on-board storage for later download to a PC. Both instruments are built into a strong, lightweight case that is equally at home in the field or in the laboratory. Light enough to be worn around the neck, they are small enough to be taken into areas which were previously too small to access. DLRO 10 uses a large, bright 4-1/2-digit LED display while DLRO 10X has a large, backlit LCD display.

    View More
  • Megger MOM600A   | Micro-OhmMeter
    Megger MOM600A | Micro-OhmMeter

    The risk of overheating is becoming more serious due to the fact that today's distribution networks have to carry heavier loads. Checking contact resistances at regular intervals detects faults before they cause overheating. Microhmmeters are used to measure contact resistances in highvoltage breakers, disconnecting switches (isolators), knife-contact fuses, bus joints, line joints etc.

    View More
  • Megger MJOLNER Series | Micro-OhmMeter with DualGround
    Megger MJOLNER Series | Micro-OhmMeter with DualGround

    The MJÖLNER Series is designed to measure the resistance of circuit breaker contacts, bus-bar joints, contact elements in bus-bars and other high-current links. This product has been designed with safety, ease of use and versatility in mind. It can be used anywhere to measure a low resistance value with high accuracy. It conducts true DC ripple free current testing of bus bars, circuit breakers, fuses, etc.

    View More
  • Megger DLRO10   | Micro-OhmMeter
    Megger DLRO10 | Micro-OhmMeter

    The MEGGER DLRO10 bring new standards to low resistance measurement. A fully automatic instrument, selecting the most suitable test current, up to 10 A dc to measure resistance from 0.1 µ? to 2000 ? on one of seven ranges. The DLRO10 is built into a strong, lightweight case that is equally at home in the field or in the laboratory. Light enough to be worn around the neck, they are small enough to be taken into areas which were previously too small to access. DLRO 10 uses a large, bright 4-1/2-digit LED display.

    View More
  • Megger MOM690   | Micro-OhmMeter
    Megger MOM690 | Micro-OhmMeter

    MOM690™ supplements our family of microhmmeters. In addition to high current capacity, MOM690™ features microprocessor-based measurement, storage and reporting. The built-in software enables you to carry out an individual test or an entire series of tests and store the results. With the optional MOMWin™ software you can also export the test results to a PC for further analysis and reporting. Ranges are set automatically, resistances are measured continually and test results can be automatically captured at a preset test current.

    View More
  • Megger MOM200A   | Micro-OhmMeter
    Megger MOM200A | Micro-OhmMeter

    The MOM200A is designed to check and measure contact resistances in highvoltage circuit breakers, disconnecting switches (isolators) and busbar joints. This unit is an excellent choice when 200 amperes or less are needed for measurement.

    View More
  • MEGGER MOM2   | Micro-OhmMeter
    MEGGER MOM2 | Micro-OhmMeter

    The MOM2 is designed to measure the resistance of circuit breaker contacts, bus-bar joints and other high-current links. This product is designed with safety, ease of use and versatility in mind. MOM2 uses an ultra capacitor to generate the high output current. The ultra capacitor is able to store a huge amount of energy compared to conventional capacitors and can deliver very high current during the discharge thanks to its very low internal resistance. The microhmmeter can be used anywhere to measure a low resistance value with high accuracy. With MOM2 it is possible to make measurements according to the DualGround™ method. This means that the test object will be grounded on both sides throughout the test giving a safer, faster and easier workflow.

    View More
  • Megger BT51   | Micro-OhmMeter
    Megger BT51 | Micro-OhmMeter

    The BT51 Low Resistance Ohmmeter makes measurements by passing a current through the conductor under test and also monitoring the voltage across it. The test current is limited by a simple current limiting circuit and is measured by monitoring the voltage across a resistor. The test current is maintained at a nominal 2 A, and as the measurement is ratiometric, the reading is unaffected by any current variations.

    View More
  • MEGGER DLRO200   | Micro-OhmMeter
    MEGGER DLRO200 | Micro-OhmMeter

    Megger DLRO200 measures resistances between 0.1 µ? and 1 ?, at high currents. This versatile instrument can provide test currents from 10 A up to 200 A, subject to the load resistance and supply voltage. A large LCD displays all all test parameters and measurement results.

    View More
  • MEGGER DLRO600   | Micro-OhmMeter
    MEGGER DLRO600 | Micro-OhmMeter

    Megger DLRO600 measures resistances between 0.1 µohms and 1 µohms, at high currents. This versatile instrument can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage. A large liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed. The unique design allows the weight and size of DLRO600 to be kept to a minimum; the instrument weighs less than 33 lbs (15kg). This small size makes DLRO600 equally at home in the workshop, on the production floor or in the field. The high current capability and compact design make DLRO600 suitable for testing circuit breaker contacts, switch contacts, busbar joints or other applications where high current is needed.

    View More
  • MEGGER TM1800   | Circuit Breaker Analyzer System with DualGround
    MEGGER TM1800 | Circuit Breaker Analyzer System with DualGround

    The TM1800 is the instrument platform for circuit breaker maintenance, based on more than 20 years’ experience of over 4,000 delivered breaker analyzers. The modular construction makes it possible to configure the TM1800 for measurements on all known types of circuit breakers in operation in today’s power world.

    View More
  • MEGGER TM1700 Series   | Circuit Breaker Analyzer System with DualGround
    MEGGER TM1700 Series | Circuit Breaker Analyzer System with DualGround

    The TM1700 series circuit breaker analysers utilizes some of the ground breaking technology from the top of the line version TM1800. There are four models starting from PC-remote controlled to fully stand-alone. All models can be controlled from a computer using the well proven data management and analysing software CABA Win. The robust design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing. All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments. Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections. The patented DualGround™ method makes the testing safe and time saving by keeping the circuit breaker grounded on both sides throughout the test. The timing measurement inputs are using a patented Active Interference Suppression algorithm to ensure correct timing and accurate PIR (Pre-Insertion Resistor) values even at high capacitively coupled interference currents. The adaptive and easy-to-use software allow the user to perform the test by simply turning the test switch without the need for settings. The operator is only one click away from advanced help functions such as connection diagrams. The 8” color touch screen, with on-screen keyboard, allows the user to efficiently operate this high-level interface.

    View More
  • MEGGER EGIL   | Circuit Breaker Analyzer
    MEGGER EGIL | Circuit Breaker Analyzer

    The Programma EGIL is an automatic timer and motion analyzer for medium- and high-voltage substation circuit breakers. It is intended for use on circuit breakers with one contact per phase. EGIL incorporates features commonly found on more complex test systems, but is designed to be smaller, simpler to use and less expensive than other similar test sets. It’s price makes it attractive to smaller utilities and it is an ideal supplementary product for maintenance departments at larger power companies and for testing contractors.

    View More
  • MEGGER B10E   | Power Supply Unit
    MEGGER B10E | Power Supply Unit

    A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel, testing equipment and also for the equipment being tested. The best way to ascertain whether or not solenoids and protective mechanisms are sluggish or set improperly is to perform a test at minimum tripping voltage. The minimum trip voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc. B10E DC Voltage Power Supply can be used to test breaker coils in this manner. It provides a ripple-free variable DC voltage that can easily accommodate a high, variable load.

    View More
  • MEGGER VIDAR  |  Vacuum Tester
    MEGGER VIDAR | Vacuum Tester

    When a vacuum circuit breaker is commissioned or undergoes routine tests, it is very important to be able to ascertain whether or not the Vacuum Interrupter (VI) is intact before putting it back into operation. VIDAR enables you to check the integrity of the vacuum interrupter quickly and conveniently by means of the known relationship between the flashover voltage and the vacuum interrupter. A suitable test voltage (DC) is applied to the breaker, and the result is known immediately.

    View More
  • MEGGER PCA2 |  On-Load Protection Condition Analyzer
    MEGGER PCA2 | On-Load Protection Condition Analyzer

    Developed to facilitate nonintrusive testing of the entire substation protection system while on-line, PCA2 incorporates an advanced current injection unit together with a multichannel recorder. Both injection and recording functions can be used together or totally independently. All instrument control is via a bright high-resolution colour touch-screen. The built-in printer provides an instant hard-copy printout. The USB port enables quick and convenient results transfer to a PC via ‘pen drives’ as well as the use of a Bar Code Reader for quick site data entry.

    View More
  • MEGGER MS-2A   | Circuit Breaker and Over Current Relay Test Set
    MEGGER MS-2A | Circuit Breaker and Over Current Relay Test Set

    A variable DC voltage is needed to test a circuit breaker. Substation batteries should not be used since this entails considerable risk for testing personnel, testing equipment and also for the equipment being tested. The best way to ascertain whether or not solenoids and protective mechanisms are sluggish or set improperly is to perform a test at minimum tripping voltage. The minimum trip voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc. B10E DC Voltage Power Supply can be used to test breaker coils in this manner. It provides a ripple-free variable DC voltage that can easily accommodate a high, variable load.

    View More
  • MEGGER FRAX Series   | Sweep Frequency Response Analyzer
    MEGGER FRAX Series | Sweep Frequency Response Analyzer

    Power transformers are some of the most vital components in today’s transmission and distribution infrastructure. Transformer failures cost enormous amounts of money in unexpected outages and unscheduled maintenance. It is important to avoid these failures and make testing and diagnostics reliable and efficient. The FRAX series of sweep frequency response analyzers (SFRA) detects mechanical and electrical changes of the core and winding assembly of power transformers. Major utilities and service companies have used the FRA method for more than a decade and the method is covered in international standards. The measurement is easy to perform and will capture a unique fingerprint of the transformer. The measurement result is compared to a reference fingerprint and gives a direct answer if the mechanical parts of the transformer are unchanged or not. Deviations indicate geometrical and/or electrical changes within the transformer.

    View More
  • MEGGER IDAX 300/350   | Insulation Diagnostic Analyzer
    MEGGER IDAX 300/350 | Insulation Diagnostic Analyzer

    IDAX300 is a very compact instrument and is used together with an external computer. The IDAX350 has a built-in computer but can also be used with an external computer. IDAX300 and IDAX350 provide an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. The IDAX system maximizes the outcome of maintenance activities allowing for load and service life optimization. IDAX300 and IDAX350 are smaller, lighter and faster than their predecessor IDA200 and IDAX206. It maintains better accuracy and ability to provide reliable data using true AC DFR (Dielectric Frequency Response), also known as FDS (Frequency Domain Spectroscopy), for reliable test results in high interference environments. The state-of-the-art software makes testing both easier and faster, allowing transformer moisture and oil assessment in about 22 minutes (20°C).

    View More
  • MEGGER CDAX605   | Capacitance and Dissipation Factor Test Set
    MEGGER CDAX605 | Capacitance and Dissipation Factor Test Set

    CDAX 605 is a capacitance and dissipation factor test set to be used with an external power source/generator. It is a precision instrument using a combination of bridge and direct (vector) measurements and is capable of measuring capacitive, resistive and inductive loads. CDAX 605 is designed for laboratory, production line or field testing of electrical equipment insulation and insulating materials as well as e.g. calibration of CCVTs and other ratio devices. A test set with unique high accuracy for the most demanding applications.

    View More
  • MEGGER TTR25   | Handheld Transformer Turn Ratio Tester
    MEGGER TTR25 | Handheld Transformer Turn Ratio Tester

    The Megger TTR25 is an automatic hand-held battery operated transformer turns ratio test set. It is used to measure the turns ratio, excitation current and polarity of windings in single- and three-phase distribution and power transformers (tested phase by phase), potential & current transformers, and tapped transformers. The unique design of the TTR25 allows the user to operate the test set while holding it in one hand. It effectively eliminates the user from having to kneel or bend down to operate the instrument and speeds up testing time. Realizing the extreme environments in which the TTR25 must operate, special attention has been paid to making it extra rugged, with a high impact, shock resistant case, yet incredibly lightweight at a mere 870 g (1.9 lbs).

    View More
  • MEGGER TTR100   | Handheld Transformer Turn Ratio Tester
    MEGGER TTR100 | Handheld Transformer Turn Ratio Tester

    The latest TTR available from Megger is the TTR100, a handheld, robust, lightweight and battery operated instrument. This TTR will complement several existing Megger transformer test products and will offer functions, such as winding resistance and polarity. These functions, as well as the phase angle measurement function, can be switched off when not required. With a turn ratio of 20,000:1, the TTR100 offers the highest turns ratio accuracy in the industry of 0.1%. The TTR100 features special software capabilities. The TTR100 is used to perform final test and calibration of transformers in the manufacturing process, such as a QA or Test Department. Using the new TTR100 in this environment will improve the productivity of such QA testing, as well as efficiently collect and store large amounts of data, which can be uploaded to a PC spreadsheet, or data base program.

    View More
  • MEGGER TTR300 Series   | Transformer Turn Ratio Tester
    MEGGER TTR300 Series | Transformer Turn Ratio Tester

    The TTR300 Series of three-phase transformer turns ratio test sets are designed to measure the turns ratio of power, instrument, and distribution transformers in a substation or manufacturing environment. A rugged and robust design makes these instruments well suited for use in a variety of harsh environments. Our leads are specially designed to provide the necessary flexibility needed in cold weather. The TTR300 Series are ideal for use by power transformer manufacturers. Their unique testing procedures and storage capability allows an operator to set up and test difficult three-phase transformers (with multiple tap changers and bushing CTs) in a fraction of the time than it used to take with other TTRs. This test also includes a pass/fail limit of individual ratios.

    View More
  • MEGGER MTO210   | Transformer OhmMeter
    MEGGER MTO210 | Transformer OhmMeter

    The MTO210 Transformer Ohmmeter is a line-operated, field-portable instrument designed specifically to measure the dc resistance of all types of magnetic windings safely and accurately. It can test transformers and rotating machine windings and perform low-current resistance measurements on connections, contacts and control circuits. The Transformer Ohmmeter is extremely useful when testing the windings and contact resistance of tap-changers with “make-before-break” contacts and voltage regulators. This action will check for pitted or misaligned contacts as the instrument will give an indication if either condition occurs.

    View More
  • MEGGER MTO3XX Series   | Transformer OhmMeter
    MEGGER MTO3XX Series | Transformer OhmMeter

    The MTO 3xx series delivers full eight-terminal/six-winding resistance measurement capability. It is designed to save time for the user by testing all normal 6 windings without having to disconnect and reconnect leads during testing. The MTO3xx series also shares the Megger TTR3xx series lead set. Users who test both turns ratio and winding resistance can save time and money since only one lead set is needed to connect to the transformer.

    View More
  • MEGGER OTS100AF, OTS80AF and OTS60AF  | Laboratory Oil Test Set
    MEGGER OTS100AF, OTS80AF and OTS60AF | Laboratory Oil Test Set

    Megger’s automatic laboratory oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids. Moulded test vessels give repeatable results with lock in precision electrode gap setting adjustment wheels. The transparent, shielded lid and large test chamber enable easy access to the test vessel. All three laboratory models are fitted with a 12 key alphanumeric keypad to facilitate entry of test ID, filenames, notes etc. Alpha characters are entered by repetitive pressing on a key, the same way as text is entered modern cellular telephones.

    View More
  • MEGGER OTS60PB and OTS8PB   | Portable Oil Test Set
    MEGGER OTS60PB and OTS8PB | Portable Oil Test Set

    Megger’s automatic portable oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids. Moulded test vessels give repeatable results in the field and laboratory with lock in precision electrode gap setting adjustment wheels. The transparent, shielded lid is a key feature enabling users to see what is happening within the test chamber. Megger portable 60 kV and 80 kV oil test sets are the lightest on the market ranging from 16 kg to 23.5 kg depending on model and configuration. They come complete with optional carry bag and transport case.

    View More
  • MEGGER OTS60SX  | Manual Oil Test Set
    MEGGER OTS60SX | Manual Oil Test Set

    The OTS60SX are manual oil dielectric strength test sets with maximum test voltages of 60 kV.

    View More
  • MEGGER KF875 and KF-LAB MkII   | Portable Moisture in Insulationg Oil Test Set
    MEGGER KF875 and KF-LAB MkII | Portable Moisture in Insulationg Oil Test Set

    Over 20 years experience has led to the development of the Megger KF875 and KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site. The KF875 and KF-LAB MkII are highly portable instruments, complete with integral printer and carrying case, are easy to use and provide highly accurate results. Optimized for testing insulating oils with a specific gravity of 0.875, the Megger KF875 simply requires the operator to press one button and inject a 1ml sample into the test cell. The simple ‘one touch’ operation makes the KF875 so easy to use that it requires no specialist knowledge or training to use it effectively. Results are presented on the instrument display and on the integral printer in both micrograms of water and in milligrams per kilogram (parts per million, ppm). The KF-LAB MkII allows the titration of samples with a range of specific gravities from 0.60 to 1.40 and also permits the use of different sample sizes. The KF-LAB MkII also has a default setting optimized for analyzing insulating oils with an SG of 0.875. This means it can be used to measure water content in a variety of different materials but is also easy to set up for transformer insulating oils.

    View More
  • MEGGER MRCT   | Relay and Current Transformer Test Set
    MEGGER MRCT | Relay and Current Transformer Test Set

    The Megger MRCT is a light weight, robust, portable unit used to perform demagnetization, ratio, saturation, winding resistance, polarity, phase deviation, and insulation tests on current transformers. The MRCT automatically calculates ratio errors, saturation curves, and knee points. The MRCT provides a microprocessor-controlled variable voltage and current output and precision instrumentation for automatically testing single and multi ratio CTs, reducing testing time and increasing productivity. The MRCT will directly connect to multi ratio CTs and perform all tests – saturation, ratio and polarity, winding resistance and insulation – on all taps with the push of a button and without changing leads. The MRCT can be controlled via Megger’s Smart Touch View Interface (STVI) controller. The STVI controller is a full color, high resolution, LCD touch screen which allows the user to perform manual and automatic testing quickly and easily using the manual test screen, as well as using pre-constructed test routines. The large color display permits the user to easily read all pertinent data while the test is being performed and provides the ability to view the current transformer’s saturation curve. The unit can also be configured to come without a Megger STVI and can be controlled via a laptop with Megger’s PowerDB software. Current transformers can be tested in their equipment configuration, such as being mounted in transformers, oil circuit breakers or switchgear. It is necessary for the equipment to be completely isolated from the electrical system prior to testing.

    View More
  • MEGGER DELTA4000 Series   | Capacitance and Dissipation Factor Test Set
    MEGGER DELTA4000 Series | Capacitance and Dissipation Factor Test Set

    DELTA4000 series is a fully automatic 12 kV insulation power factor / dissipation factor (tan delta) test set designed for condition assessment of electrical insulation in high voltage apparatus such as transformers, bushings, circuit breakers, cables, lightning arresters, and rotating machinery. Two configurations make up the Series: • DELTA4110 with external computer (not included) consists of the DELTA4100 control unit and DELTA4010 high-voltage unit • DELTA4310 comes with onboard computer and consists of DELTA4300 control unit and DELTA4010 high-voltage unit

    View More
  • MEGGER Easy Test 20kV   | VLF Cable Insulation Test
    MEGGER Easy Test 20kV | VLF Cable Insulation Test

    The Easytest represents a simplified version of the standard VLF test. It has been designed to verify operational integrity versus operational reliability, which is the objective of a standard VLF test in accordance with the respective standards. Typically, a simplified test is performed in accordance with company specifications after repairs or after a new cable or circuit has been installed. The purpose of such a test is to verify the integrity of the cable and there accessories before switching the circuit back into operation. The Easytest allows such a test at voltages well above operating voltage in order to provide a safe indication regarding operational integrity.

    View More
  • MEGGER VLF CR-28/40/60  | VLF Cable Insulation Test
    MEGGER VLF CR-28/40/60 | VLF Cable Insulation Test

    The portable, high-performance and energy-efficient VLF test systems are used for testing cables with 0.1 Hz cosine-rectangular voltage according to IEC/IEEE/CENELEC standards. In accordance with guidelines, the dielectric strength of cables and joints must be checked after installation or repair. The VLF test systems from SebaKMT have high test-capacities and are still compact, because of the patented voltage wave-shape and the power-recycling during polarity reversal. Aside from cable and sheath testing, the test systems can also be used for the precise pinpointing of sheath faults (in combination with a step-voltage probe). In total three portable systems are available, each with different voltage levels (28, 40 and 60 kVrms): - VLF CR-28 up to cable series 15 kV - VLF CR-40 up to cable series 23 kV - VLF CR-60 up to cable series 35 kV

    View More
  • MEGGER VLF CR-60/80-HP   | VLF Cable Insulation Test
    MEGGER VLF CR-60/80-HP | VLF Cable Insulation Test

    Powerful 0.1 Hz VLF test system with energy recovery for testing of cables with Cosine Rectangular Wave voltage according to VDE, IEC and IEEE. In accordance with most regulations, cables and joints must be tested after installation or repair. The Seba KMT VLF Test System CR 60 kV can be used to test cables with operating voltage levels up to 36 kV. The system consists of a control unit and a HV unit. The high test capacity of 6.5 ?F permits the simultaneous testing of all three phases. Positive and negative DC testing of cables and connected switchgear can be carried by DC Mode. This VLF Test System CR 60 kV can be used both as a stand alone system and as integrated part of a test van system.

    View More
  • MEGGER VLF Sinus 34kV   | VLF Cable Insulation Test
    MEGGER VLF Sinus 34kV | VLF Cable Insulation Test

    The VLF sine wave 34 kV is a compact, robust and portable VLF sine wave test system for medium voltage cables. The design, optimized for rapid transportation and quick setup, and the continuous duty cycle are two attributes that qualify the system as an ideal tool for routine cable testing. For both 0.1 Hz sine wave voltage tests and rectangular or DC voltage tests, the VLF sine wave 34 kV fills the highest demands on the test voltage quality and stability. Moreover, the integrated “breakdown detection“ shuts down the test voltage in the event of an excessive charge current and guarantees limited damage to the cable. Consistent single-button operation combined with a sophisticated operating concept allows a fast and targeted use of the system.

    View More
  • MEGGER Teleflex LV Monitor   |  Portable TDR for LV and CFL
    MEGGER Teleflex LV Monitor | Portable TDR for LV and CFL

    The Teleflex LV Monitor is for the location of faults on low voltage cables, especially for the detection if intermittent fault, which result in specific difficulties. Additionally the voltage and current waveforms are recorded. The stored data is retrieved from a PC or Notebook via Bluetooth or via a telephone connection (Line or GSM). In opposition to other portable reflectometers, the Teleflex LV monitor is permanent and simultaneous connected to all three phases of the LV cables and permits the user to do a reflection measurement on all the phases and their combinations, either locally or in remote operation. The supply of the Teleflex LV Monitor happens by one of the connected phases.

    View More
  • MEGGER VLF Sinus 45kV   | VLF Cable Insulation Test
    MEGGER VLF Sinus 45kV | VLF Cable Insulation Test

    The VLF sine wave 45 kV with integrated tanDelta is a compact, robust, and portable high-performance test and diagnostic system for medium voltage cables. The 45 kV tester is a multifunctional tool: apart from VLF and DC testing, it also performs sheath testing and sheath fault pinpointing (in combination with the step voltage probe ESG NT). Moreover, the optional internal tanDelta expands the system to assess both cable integrity and condition. The smart VLF system automatically adjusts the test frequency to the cable length, making even tests on 25 kV rated cables (up to 25 km) easy and reliable.

    View More
  • MEGGER VLF Sinus 54kV   | VLF Cable Insulation Test
    MEGGER VLF Sinus 54kV | VLF Cable Insulation Test

    The VLF Sinus 54 kV is the ideal system for all users who want to or must test with a genuine 0.1 Hz sine wave voltage. The VLF testing system can be perfectly integrated in a fault location system or in combination with an OWTS and the optional tanDelta test attachment as part of a diagnostic test van. The system is designed for continuous operation which prevents unnecessary waiting times and increases test efficiency drastically. Using a USB stick, logs can be conveniently created in.csv format, enabling further data processing, and are also saved in Easyprot format (software supplied) for clear and structured reports. Sheath faults can be precisely pinpointed by using the step voltage method in combination with the optional available step-voltage probe ESG NT.

    View More
  • MEGGER PVS 100   | Cable Identification
    MEGGER PVS 100 | Cable Identification

    The exact knowledge of the phase assignment in the area of power distribution is an essential requirement for the safe and reliable power network operation. This covers all voltage levels from a low voltage distribution to high voltage transmission systems. A phase identification or verification is required for the determination of load distribution, the control of the phase assignment of old or new installation and prior to switching to avoid damages and outages. The phase identification with the PVS 100 enhances the safety of power distribution systems and prevents accidents.

    View More
  • MEGGER Cable Identifier   | Cable Identification
    MEGGER Cable Identifier | Cable Identification

    The CI Cable Identifier will safely identify a dead (or de-energized) primary cable within a group of energized or de-energized cables as well as live secondary cables (including neutrals) up to 240 VAC (460 optional). The absolute safe identification is based on polarity and signal magnitude of the DC pulse (up to 100 A) coming from the transmitter, which is picked up by the receiver and a clip-on probe. The transmitter can operate on 120 VAC or internal battery (up to 50 hrs run time). The entire system functions without user adjustments and will, under no circumstances, provide a false positive identification. The standard combination kit (for HV & LV cables) includes a 6” flexible clip-on probe, and two touch sensors for all your applications where a clip on cannot be used.

    View More
  • MEGGER PIL 8   | Cable Phase Identification
    MEGGER PIL 8 | Cable Phase Identification

    The Phase identification System PIL 8 permits a fast and especially safe phase determination at the jointing location during the mounting of medium voltage cables. According to DIN VDE 0105 0100 part 2 (EN 50110-1) from Oct. 1997, Pos. 6.2.4.1 Topic 3 (Page 12) it specifies : "... If the earthing or shorting has to be removed for the duration of measurements or tests, suitable other safety measures have to be taken.” Such safety measures require a relatively large effort and are not always practical. The specific advantage of the technology used in the PIL 8 is the fact, that the ground or shorting must not be removed. In opposition, this grounding it is an essential part of the procedure, which means, the cable must be grounded and shorted for the system to work. Resulting the use is absolutely safe. For each phase the according transceiver clamp are installed tot he grounded cable end and then at the selection point each phase is identified and marked.

    View More
  • MEGGER Detex   | Voltage Detector
    MEGGER Detex | Voltage Detector

    For use on any grounded electrical system, DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550 kV. Biddle offers six electronic "beeper" models and one model with LED indication for greater visibility when testing indoors. The beeper-style electronic detectors provide audible and visual indication of the presence of phase-to-ground ac voltages, in accordance with ANSI C84.1-1982 standards. The 6.9-kV model is equipped with a telescopic pole. All other models are fitted for universal spline mounting on a hot line pole rated for the voltage of the system being tested. Electronic voltage detectors for use on distribution line voltages (Cat. No. 514360 series) provide a single red LED. Detectors rated for transmission line voltages (Cat. No. 514242 series) provide four LEDs for improved visibility at greater distances. The LED-indicating voltage detector is designed for indoor testing of grounded ac systems. A bright LED indicator provides easy visibility in poor lighting conditions. During testing, the presence of voltages within the detector's operating range will illuminate the bright LED lamp. A built-in piezoelectric voltage source provides a test feature to ensure that the detector is operative before use. The self-test is activated by a pushbutton. The LED detector is equipped with a 48-in. (1219-mm) telescopic pole calibrated and marked for voltages within the ratings of the detector. These demarcations assist the user in adjusting the pole to the length required for safe operation. The pole retracts to 34 in. (864 mm) for convenient storage in a vinyl carrying case when not in use.

    View More
  • MEGGER Teleflex SX/VX   | Portable TDR for CFL
    MEGGER Teleflex SX/VX | Portable TDR for CFL

    With the Teleflex SX the excellent properties of the successful Teleflex VX were transferred into a smaller, handy and portable design. The Teleflex SX is operated by the new touchscreen and the well proven control knob functionality. The interface is shown on a sharp and very bright 10.4” display. The Teleflex SX is specially adapted to the fast events during fault location in power cables. The easyGO operation is reduced to the important and essential steps and operates almost automatically. The Teleflex VX measuring hardware and display are separated, and communicate via Ethernet. This allows easy integration into a fault location system.

    View More
  • MEGGER TeleflexT3060   | 1-Phase TDR
    MEGGER TeleflexT3060 | 1-Phase TDR

    Based on the same hardware and software we successfully used for our cable fault location systems EZ Thump and Smart Thump, the new Teleflex T 3060 reflectometer is designed to provide the user with a cross-system operational concept. The Teleflex T 3060 can be used as a battery-operated stand-alone unit, or in combination with small, portable systems. The device can be used in the following modes: EasyGo Mode: automatic operation and measurement evaluation Step by step Mode: supports the learning of the fault location process while using different systems Expert Mode: complete range of commands and functions of a Teleflex reflectometer. The user can create a customised menu structure with up to 20 functions.

    View More
  • MEGGER TDR1000/3P   |   Single Channel Cable Fault Locator
    MEGGER TDR1000/3P | Single Channel Cable Fault Locator

    A state-of-the-art single channel TDR capable of indentifying and locating faults on metalic cables. The TDR1000/3P is suitable for use on both dead or live cables.

    View More
  • MEGGER MTDR300   | 3-Phase TDR
    MEGGER MTDR300 | 3-Phase TDR

    The MTDR300 is a 3-phase Time Domain Reflectometer (TDR) designed to provide quick, effective, accurate and safe prelocation of cable faults in electrical networks. Operation of the instrument is via a single jog dial and intuitive menu system. The large colour display further enhances operator comfort and aids rapid and accurate fault prelocation. The MTDR300 can be powered from its internal rechargeable battery or mains power. It’s housed in a rugged, robust, field proven case making it suitable for use in hostile or challenging environments. By combining the MTDR300 with an impulse generator (thumper) and arc reflection filter, several methods of high voltage fault prelocation are possible. The CAS-1 stand-alone software package is supplied with all MTDR300’s. This package allows the download (and upload) of saved traces for future analysis. It is also an ideal training package, as it contains all features of the MTDR itself.

    View More
  • MEGGER EZ-Thump   | Portable Cable Fault Locator
    MEGGER EZ-Thump | Portable Cable Fault Locator

    The EZ-THUMP4 and EZ-THUMP12 are compact and light, battery and AC line operated, portable cable fault location systems. They are designed for quick, effective, accurate and safe fault locating operations to greatly reduce system customer outage minutes. Due to their rugged yet portable enclosure, they are ideally suited either for use in a “satellite” fault locating concept for remote areas that may have less frequent faults, when ease of operation, low weight and economics are important, or for hard to access inner city locations.

    View More
  • MEGGER Smart Thump 16   | Portable Cable Fault Locator
    MEGGER Smart Thump 16 | Portable Cable Fault Locator

    The SMART THUMP ST Series of cable fault locators provides safe, efficient and easy-to-use solution for quickly identifying, prelocating and pinpointing various types of cable faults for power cables. The ST Series was developed to meet the requirements for typical low- and medium-voltage distribution cable fault location markets. Circuit parameters include: System voltage up to 35 kV Insulation EPR or XLPE Typical conductor sizes between 4 mm2 to 250 mm2 Typical circuit lengths from 100 m up to 5,000 m Typical end users include: operations department of power utility The ST Series incorporates E-Tray technology, a concept that has been already proven in other products (EZThump, EZ-Restore Overdrive, and TDR T3090) and which will be carried forward into new Megger products in the future. The E-Tray adds the unique capability to access and operate every function through an innovative and intuitive user interface, without the need to make adjustments and the software suggests the next logical step.

    View More
  • MEGGER SFX15/25   | Battery Operated Cable Fault Locator
    MEGGER SFX15/25 | Battery Operated Cable Fault Locator

    The Surgeflex 15 and 25 cable fault location systems with their 1150 J surge energy provide a standard solution for portable systems. The basic system comes already fully equipped with integrated battery, inverter/charger and is mounted on an easy to move trolley. For a fixed vehicle mounting, the systems are also available without trolley and internal battery system. For high flexibility, the systems are equipped with a separately mounted reflectometer, the T 30-E. With the ARM Arc Reflection Method, a powerful tool for the fault location, especially for high resistive faults is available.

    View More
  • MEGGER SFX 32/40  | Mobile Cable Fault Locator
    MEGGER SFX 32/40 | Mobile Cable Fault Locator

    The system is directly controlled via CAN Bus by the connected Teleflex SX or via the integrated PLC operating panel. All functions of the system can be easily performed using the rotary encoder. The system supports easy and clear handling, even for inexperienced users.

    View More
  • MEGGER SFX5-1000   | Portable Cable Fault Locator
    MEGGER SFX5-1000 | Portable Cable Fault Locator

    The SPG 5-1000 is a portable multi functional system for cable testing, fault conditioning pre- and pinpoint location of faults in low voltage distribution systems. Using the patented ICEplus pre-location method the operator has an very easy to use tool for prelocation of faults, especially in branched low voltage distribution systems. The evaluation of a reflection measurement is not required. The fault distance is directly displayed as numerical value. The branches have no influence on the measurement. The unit is controlled by the integrated rotary encoder and a graphic LCD for the visualisation of modes and adjusted parameters. The system supports easy handling, supports successful operation even for untrained users, and provides maximum technical safety

    View More
  • MEGGER SFX8-1000   | Portable Cable Fault
    MEGGER SFX8-1000 | Portable Cable Fault

    The Surgeflex 8 is a mobile, small and economical fault locating system, specially suited for the fault location in low voltage but also in medium voltage systems, for lighting system, pilot cables and for deep well pump cables. With its voltages levels of 2 – 4 – 8 kV the system is perfectly suited for the fault location in thes low voltage applications. The available surge energy of 1000 Joule covers all requirements. The modular construction, mounted on a trolley permits the use and transport a complete system but also allows the separation and transport in smaller components.

    View More
  • Megger HVB10   | HV Bridge Cable Fault Locator
    Megger HVB10 | HV Bridge Cable Fault Locator

    HVB10 is a highly accurate high-voltage bridge designed to locate cable and sheath faults, perform sheath testing, and pinpoint sheath faults, especially suited also for long HV cables. With its top resolution, intermittent fault detetion function, and load adaptation for faster cable charging, the HVB10 is an indispensable tool for all utilities that want to reduce downtime and facilitate repair of power and for example pilot and communication cables.

    View More
  • MEGGER digiPHONE +   | Cable Fault pinpointing
    MEGGER digiPHONE + | Cable Fault pinpointing

    The Digiphone plus pinpoints underground cable faults with unprecedented accuracy and sets a new standard by applying innovative audio concepts. This combination results in a pinpointing device for highresistive faults that is unsurpassed in sensitivity. Digiphone plus works off the “thunder and lightning principle” of fault location. In the same way you can measure how far away a storm is by counting the distant between a faster lightning flash and its slower thunder, this pinpointer works by measuring the energy around an underground fault. If you think of the flashover at a fault as the lightning, the Digiphone measures distance by figuring timing between that electromagnetic “flash” and the seismic (or acoustic) jolt also created at the moment of flashover.

    View More
  • MEGGER digiPhoe + NT Set   | Cable Fault pinpointing
    MEGGER digiPhoe + NT Set | Cable Fault pinpointing

    With new developments in cable fault location and pinpointing, SebaKMT is continuously striving to offer customers time-saving and cost-effective solutions. To meet the requirements, SebaKMT combined the two systems digiPHONE+ and ESG NT in one device: The digiPHONE+ NT Set The acousto-magnetic cable fault pinpointing and step voltage pinpointing of cable sheath faults can thus be done easily, quickly, and reliably. The operating mode switches automatically, by identifying the selected sensor.

    View More
  • MEGGER Fault Sniffer   | Cable Fault pinpointing
    MEGGER Fault Sniffer | Cable Fault pinpointing

    In many situations, conventional fault location is impossible, for example when the electrical supply of customers cannot be disconnected or the necessary fault location system is temporarily unavailable. These are situations where the Fault Sniffer enables you to quickly locate the fault without interrupting the power supply to the customers. The Fault Sniffer is not intended to replace conventional fault location but is a fast, easy to use and inexpensive supplement and alternative which does not disrupt the electricity supply. The Fault Sniffer detects and measures the typical burning gases as they are produced by cable faults and shows theit concentration. The maximum value is indicating the fault position.

    View More
  • MEGGER MMG10   | Cable Sheath Fault Locator
    MEGGER MMG10 | Cable Sheath Fault Locator

    The sheath test system MMG 10 is used for the voltage testing of plastic insulated cable jackets. The test evaluated the leakage current in respect to the cable lengths. An adjustable current limiter avoids an eventual drying or unintended change of a fault spot. The high output current can also be used for the low resistive burning of a fault. For pinpointing of sheath faults in plastic insulated shielded cables and earth faults in unshielded cables, the MMG 10 provides a pulsed output voltage. The pinpointing is done by the step voltage method with the Earth fault locator ESG 80-2 / ESG NT. The MMG 10 can also be used as Burn voltage supply for the Arc Reflection Burning with the ETF 3.

    View More
  • MEGGER MFM10   | Cable Sheath Fault Locator
    MEGGER MFM10 | Cable Sheath Fault Locator

    The intuitive, menu supported operator guidance of the MFM 10 work with the approve SebaKMT Easy-Go principle. The fully automatic measurement and evaluation of the measured data gives the operator a fast, easy and reliable tool to test the sheath of cables, and to perform a prelocation and pinpointing of detected faults. The bipolar prelocation supports the detection of galvanic and thermoelectric influences and increases the prelocation accuracy and quality.

    View More
  • MEGGER ESG NT   | Cable Sheath Fault pinpointer
    MEGGER ESG NT | Cable Sheath Fault pinpointer

    The earth fault locator ESG NT is used for the high accuracy pinpointing of a sheath fault. State of the art technology in connection with a bright, sun readable TFT color Display allows an very easy use. The display happens by a bargraph, similar to the analogue display or by a history display, which shows the deflections of the last 7 pulses. A fully automatic calibration keeps the display always at zero and the integrated noise suppression eliminates all influences by DC, Railway currents, industrial plants and high resistive soil environment. By two earth rods, the ground step voltage potential is measured and the direction towards the fault is indicated by the display. The ESG NT is also available as combination set with the digiPHONE+ in one unit.

    View More
  • MEGGER PFL Series   | Cable Fault Locator
    MEGGER PFL Series | Cable Fault Locator

    The PFL Series of cable fault locators provide a versatile, portable solution for advanced identification, prelocation, and pinpointing of cable faults on a wide variety of cable types. The PFL22M1500 and PFL32M1500 perform DC insulation testing up to 20 kV and 32 kV, 8/16kV and 16/32 arc reflection with 1500 joules surge output, arc reflection plus, differential arc reflection and impulse current and pulse echo modes of fault prelocation. The unit incorporates Megger's newest TDR, the MTDR100. The MTDR100 offers auto ranging, a comprehensive cable library and is user friendly with a single selection knob.

    View More
  • PFL40A Series   | Cable Fault Locator
    PFL40A Series | Cable Fault Locator

    The prime objective of any cable fault location system is to provide quick, effective, accurate and safe fault location, thereby reducing system outages and “customer minutes lost.” The new PFL40A family of compact Megger cable fault locating systems is designed to meet this criterion. These new systems are seen as a valuable extension to our existing range of CFL instruments and capabilities. The standard system comes as a mobile compact system that can be further customised by the customer to meet local requirements. All systems offer the facility to undertake cable testing; cable and fault diagnosis; prelocation of cable faults; fault conditioning; pinpoint location using acoustic methods.

    View More
  • MEGGER VLF CR 20   | VLF Cable Insulation Test
    MEGGER VLF CR 20 | VLF Cable Insulation Test

    In accordance with most regulations, cables and joints must be tested after installation or repair. For this test the breakdown strength of the cable is tested. The portable VLF Test System 20 kV can be used to test the cables in conjunction with the according local regulations for operating voltage levels up to 11 kV for new cables and 16 kV for aged cables at 3 µF cable capacity. By using the patented 0.1 Hz Cosine Square Wave Voltage PE, XLPE and paper cables are brought to a controlled breakdown very fast without causing additional damage or aging to the cable insulation.

    View More
  • Megger HV Tester 25kV   | Portable HV DC Test
    Megger HV Tester 25kV | Portable HV DC Test

    The HV Tester 25 kV is a high-voltage generator with a variable negative DC output voltage of 0 - 25 kV. The condition of the test object with regard to electrical strength and insulation quality can be determined on the basis of the unit's readings for output voltage and current. Due to its small size and internal battery this test-system is ideal for test-conditions where no external power supply is available.

    View More
  • Megger HV Test Set 70 / 120 / 160kV  | Portable HV DC Test
    Megger HV Test Set 70 / 120 / 160kV | Portable HV DC Test

    High Voltage DC Dielectric Test Sets provide the most dependable, portable DC highvoltage sources for checking the quality of electrical power cables, motors, switchgear, insulators, transformers and capacitors.

    View More
  • MEGGER T 22/1   | HV AC Test Set up to 75kV RMS
    MEGGER T 22/1 | HV AC Test Set up to 75kV RMS

    The AC Voltage Test Set T 22/1 is a portable test set consisting of two separate units: the control unit and the high-voltage unit. This division enables the operator to use the test set on site without transport aids. The test set can be equipped with a rectifier attachment for DC voltage testing up to 80 kV.

    View More
  • MEGGER HPA 100 HPA 130 DC   | HV AC Test Set up to 100kV
    MEGGER HPA 100 HPA 130 DC | HV AC Test Set up to 100kV

    The AC Test Set HPA 100 is a powerful test set. The unit has been designed for mounting in cable test van and can be used for testing of cable systems and for burning down high-resistance cable faults with a high breakdown voltage. The test set can be equipped with a rectifier attachment for DC testing up to 130 kV. Since the own noise-level of the test system is below 1 pC, it is also suitable as a voltage source for PD-measurements.

    View More
  • MEGGER HPA 35/50/78   | HV AC Test Set up to 78kV
    MEGGER HPA 35/50/78 | HV AC Test Set up to 78kV

    The AC voltage test sets HPA 35 to 78 are suitable for 50 Hz AC testing of test objects with a low capacity. In addition to 50 Hz AC testing these units can also be enhanced to a DC test set, (see DC-Test Systems). Typical application areas: - Testing of switchgear - Testing of current-transformers - Testing of MV plant/ component testing

    View More
  • MEGGER Highpot Tester   | AC and AC/DC  HV Test up to 5kV dc
    MEGGER Highpot Tester | AC and AC/DC HV Test up to 5kV dc

    The AC and AC/DC High-Pot Testers are designed for safety and ease of operation, and readily adapt to development, maintenance and production testing. Three models are available: two ac and one ac/dc. These instruments test the dielectric strength of electrical insulation and the ground circuit continuity of three-wire appliances and other devices. They feature front-panel adjustable leakage current trip, one-second or continuous testing, and automatic failure shutdown.

    View More
  • MEGGER 5/15kV DC   | Dielectric Test Set
    MEGGER 5/15kV DC | Dielectric Test Set

    The dc Dielectric Test Sets measure leakage current while applying a dc voltage at or above the insulation system's operating level. This measurement aids in determining the insulation system's ability to withstand overvoltages such as lightning strikes and switching surges.

    View More
  • MEGGER HV Test Set 50 / 80 / 110kV  | Portable HV DC Test
    MEGGER HV Test Set 50 / 80 / 110kV | Portable HV DC Test

    The HV Test Set is a cable tester for DC voltage testing of cables and cable installations in accordance with the international standards. It consists of an operation unit and HV unit. Due to its small size and low weight the test sets can easily be transported and used on-site. The HV Test Set is available in three versions (50/80/110 kV DC).

    View More
  • MEGGER T 99/1   | Portable HV DC Test 40kV for Cable
    MEGGER T 99/1 | Portable HV DC Test 40kV for Cable

    he high voltage test unit T99/1 is a portable and powerful test device able to generate a DC voltage of up to 40 kV. The T 99/1 is used for testing of cables, cable accessories, plant and installations. Because of the short-circuit proof design and high output current of the T 99/1, this is device is also suitable for cable fault location (in conjunction with a TDR unit).

    View More
  • MEGGER HPG70-K   | Portable 70kV HV DC Test System
    MEGGER HPG70-K | Portable 70kV HV DC Test System

    The high voltage test set HPG 70-K from SebaKMT is a fully insulated test set for DC testing up to 70 kV. Thanks to its fully insulated design this system is ideal for stand-alone applications. The DC voltage is obtained through a bridge rectifier which ensures a very low ripple of the test voltage. Moreover the DC voltage is measured on the secondary side and therefore ensures a precise output voltage.

    View More
  • MEGGER HPG 50/70/110-H   | Portable HV DC Test Sets
    MEGGER HPG 50/70/110-H | Portable HV DC Test Sets

    The High Voltage test sets HPG 50 to 110-H are suitable for 50 Hz AC-testing (35 to 78 kVRMS) and DC-testing up to 110 kV. The HPG 50 to 80-D are suitable for 50 Hz AC testing (35 to 58 kVRMS) and DC testing up to 150 kV*. The HPG test systems consist of two separate units: the control unit and the high-voltage unit. This separation enables the operator to use the test set on-site without any complications.

    View More
  • MEGGER T 26/1   | High Voltage Test System up to 800kV for Cable
    MEGGER T 26/1 | High Voltage Test System up to 800kV for Cable

    The T 26/1A and T 26/1B high-voltage test sets are efficient, mobile systems for high-voltage testing of cables, cable systems and installations as required by current regulations (VDE) with DC voltages of up to 400 kV and 650 kV respectively. The sets are suitable for both installation in measuring trailers and onsite testing as stationary test set. The spatial separation of the operating and high-voltage units makes it possible to operate the sets from outside the immediate danger area. Their modular structure makes them easy to set up on site and allows adaptation to measuring tasks. The sets are primarily designed for power supply companies, cable laying firms and cable manufacturers for the DC voltage testing of high-voltage systems and cables. Their short-circuit-proof output circuit and high power make them suitable for use in fault location as a burn-down unit for burning high-impedance and intermittent cable fault.

    View More
  • MEGGER DET14  / 24  | Clamp-On Earth Resistance Tester
    MEGGER DET14 / 24 | Clamp-On Earth Resistance Tester

    The DET14C and DET24C represent a new generation of earth/ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection.

    View More
  • MEGGER Professional Earth Test KIT
    MEGGER Professional Earth Test KIT

    The Megger Professional Earth Test Kit is designed to be as practical as possible. Housed in a tough polyethylene carry case, the kit is stored neatly, well-protected and easy to transport. In use the reels are fitted and retained on the spike handles, simply run out the test lead to the instrument and plug in, plug the other end directly into the spike, and test, easy.

    View More
  • MEGGER DET2/2   | High Resolution Earth Tester
    MEGGER DET2/2 | High Resolution Earth Tester

    The DET2/2 digital ground resistance tester provides a wide resistance range from 0.010 ? to 19.99 kilohms for testing larger or more complex grounding systems and for difficult testing environments, with ±0.5% accuracy and 0.001 ? resolution. Microprocessor control and advanced filtering simplify testing in environments with high levels of interference.

    View More
  • MEGGER DET3 Series  | Earth and Ground Resistance Tester
    MEGGER DET3 Series | Earth and Ground Resistance Tester

    The ground tester is rated to IP54 making it truly an outdoor instrument. The ground tester has been designed to be easy to use - a large selector switch makes selection of 2 and 3 pole test easy with gloved hands - and the design makes the fitting of shorting links to perform 2 pole tests a thing of the past. A large, clear, easy to read LCD display and thumb sized test button again makes the instrument particularly suited to the outdoor conditions of ground testing.

    View More
  • MEGGER DET4 Series   | Earth and Ground Resistance Tester
    MEGGER DET4 Series | Earth and Ground Resistance Tester

    Megger’s popular 4-terminal ground testing instrument family includes four basic models with different kit variants for each that include select accessories for greater testing flexibility. All models are rated to IP54, making them truly outdoor instruments. They are designed to meet stringent safety standards and are rated CAT IV 100 V. The ground testers have been designed to be easy to use – a large selector switch makes selection of 2, 3 or 4 pole tests easy with gloved hands – and the design makes the fitting of shorting links to perform 2-pole tests a thing of the past.

    View More
  • MEGGER S1 Series   | Utility DC Diagnostic  Insulation Resistance Tester
    MEGGER S1 Series | Utility DC Diagnostic Insulation Resistance Tester

    S1 Series insulation resistance testers has been designed, specified and tested to meet the stringent requirements of power utilities in the 21st century. In addition to being tough, high performance insulation testers the S1 Series Megger offers the ability to perform accurate insulation resistance measurements in extreme, high noise environments, rapid charging of cable capacitance, and even remote operation for both convenience and safety. For service companies the S1 Series represents an excellent choice with its flexibility and future proofing capability. Quite simply the Megger S1-Series is designed to work wherever you work.

    View More
  • MEGGER MIT Series   | DC Diagnostic  Insulation Resistance Tester
    MEGGER MIT Series | DC Diagnostic Insulation Resistance Tester

    Megger’s range of MIT insulation resistance testers are targeted at original equipment manufacturers and industrial companies. The range MIT Series performs insulation resistance tests 5 kV up to 15 kV with a 30 T? maximum resistance and an accuracy of ±5 % from 1 M? up to 3 T?

    View More
  • MEGGER MIT30   | 30 kV Insulation Resistance Tester
    MEGGER MIT30 | 30 kV Insulation Resistance Tester

    The MIT30 is a 30 kV Insulation tester that has been developed to satisfy the demand for a variety of high voltage, high accuracy, low current applications in electrical distribution industries, aerospace and defense applications. The MIT30 cannot be used on grounded/earthed test samples. Otherwise, the unit will be damaged. The unit offers unparallel accuracy and resolution, with a high voltage output from 0 to 30 kV dc., trip levels from 0 - 360 ?A and a resolution of 1 nA (±1.5%). The MIT30 represents excellent precision in a field instrument, and gives the operator confidence in the meaningful results. The MIT30 can be used to perform step-voltage and proof tests which, when incorporated into a routine maintenance program, can aid in predicting potential failure before breakdown occurs.

    View More
  • MEGGER MIT300 Series   | LV Insulation Resistance Tester
    MEGGER MIT300 Series | LV Insulation Resistance Tester

    • Extremely easy to use • Tough rubber armoured case • Self contained protective cover • Live circuit warning • Weatherproof to IP54 • Intelligent Safety System for protection

    View More
  • MEGGER MIT400 Series   | LV Insulation Resistanc Tester
    MEGGER MIT400 Series | LV Insulation Resistanc Tester

    The MIT400 Series offers a range of models to choose from: • Choice of 4 models for commercial and plant applications – MIT Models 400, 410, 420 and 430 • Choice of 3 models for telecom applications – MIT Models 481, 482 and 485 Plus, check out our unique “special applications” model. For those who need a unique test voltage, MIT Model 40X offers a variable insulation test voltage from 10 V to 100 V applications in 1 V steps…a solution to practically any unusual measurement requirement you may have.

    View More
  • MEGGER MIT480 Series   | LV Insulation Resistanc Tester
    MEGGER MIT480 Series | LV Insulation Resistanc Tester

    An impressively designed insulation and continuity tester that answers the specific needs of the telecoms engineer. A key feature of the design of the tester is its waisted profile making it easily held by operators with the smallest of hands, and it can be used right or left-handed, just as easily. There are other features that add to the convenience of operation including, a built-in stand, probe clips etc.

    View More
  • MEGGER MFT1700   | Multifunction Tester
    MEGGER MFT1700 | Multifunction Tester

    The MFT1700 series is a range of 3 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations.

    View More
  • MEGGER DCM 3xx Series   | ClampMeter
    MEGGER DCM 3xx Series | ClampMeter

    There are four instruments in the DCM series of clamp- meters, including the 400 A a.c. current-only DCM310; the DCM320 which includes voltage and resistance measurement; the DCM330 Fork-Multimeter, which is an open fixed jaw design; and this, the DCM340. Capable of measuring a.c. and d.c. current up to 600 A; a.c. and d.c. voltage up to 600 V; resistance up to 400 ?; and frequency up to 400 Hz, the DCM340 is the most versatile in the range.

    View More
  • MEGGER DCM 2xxx series   | ClampMeter
    MEGGER DCM 2xxx series | ClampMeter

    There are three different current clamps in the DCM range covering many applications. The series starts with a plugin unit for basic a.c. current measurements made in conjunction with a multimeter, a volt plus current unit where the user needs the flexibility of being able to make voltage measurements as well as current measurements and a high current a.c./d.c. unit.

    View More
  • MEGGER LT300   | Earth Loop Impedance Tester
    MEGGER LT300 | Earth Loop Impedance Tester

    The LT300 offers high current loop testing over a wide range of frequencies and supply voltages with simple, fast, two wire operation. It has a large clear display that aids visibility in poor conditions.

    View More
  • MEGGER PA9 Wireless   | Power Quality Analyzer
    MEGGER PA9 Wireless | Power Quality Analyzer

    The new Megger PA9 Wireless is the latest innovation of the successful PA-9 Power Quality Analyzer platform. It simultaneously records power quality and power flow information. The PA9 Wireless incorporates newly enhanced key features including a wireless modem for remote communication, a full 12 MB of nonvolatile internal memory and standard auxiliary power input capabilities as well as an optional external flash card for added memory. The wireless modem allows the user to configure the unit remotely, view real-time data via the remote screen, and preview all recorded data without downloading the data.

    View More
  • MEGGER PA9 Plus   | Power Quality Analyzer
    MEGGER PA9 Plus | Power Quality Analyzer

    The Megger PA9Plus is the latest innovation of the successful PA-9 Power Quality Analyzer platform. It incorporates newly enhanced key features including a faster Digital Signal Processor (DSP) to support continually evolving capabilities, a full 12 MB of nonvolatile internal memory and standard auxiliary power input capabilities. To address worldwide requirements and applications, the PA9Plus is CE marked, supports several international languages, and adheres to applicable European and North American standards (EN50160, IEC61000-4-15, IEEE1159, IEEE519), including automatic phase lock loop synchronization of input frequencies ranging from 20 Hz to 70 Hz, flicker measurements and recording, and out of limits/frequency trending.

    View More